Overview of the 62-Layer ATE Load PCB
The 62-Layer ATE Load PCB is a high-performance, ultra-high-density placa de circuito impreso engineered for Automated Test Equipment (ATE) sistemas. Designed to handle complex signal routing and high-power loads, it meets rigorous testing requirements in semiconductor manufacturing and advanced electronics validation.
Key Definition
An ATE Load PCB is a specialized circuit board that simulates real-world operating conditions for testing integrated circuits (circuitos integrados) y componentes electronicos. The 62-layer configuration supports intricate signal paths, power distribution, and thermal management in compact designs.
Critical Design Parameters
-
Recuento de capas: 62 layers for multi-domain signal isolation and power plane optimization.
-
Dimensiones: 16.9″ × 22.9″ (large format for multi-device integration).
-
Espesor: 250 mil (balances rigidity and thermal dissipation).
-
Material: Fr4 htg (high-temperature glass epoxy for stability up to 180°C).
-
Tamaño mínimo de agujeros: 8 mil (supports high-density interconnects).
-
BGA: 0.65milímetros (enables fine-pitch component mounting).
-
Relación de aspecto: 32:1 (ensures reliable plating in microvias).
-
Drill-to-Copper: 7 mil (prevents short circuits).
-
POFV & Back-Drilling: Eliminates signal distortion in high-frequency applications.
-
Acabado superficial: Eneg (Electroless Nickel Electroless Gold for corrosion resistance).
Core Functionality
El tarjeta de circuito impreso routes test signals between ATE systems and devices under test (DUTs), ensuring accurate voltage/current measurements. Back-drilling removes unused via stubs to minimize signal reflections, while POFV (Plated Over Filled Vias) enhances thermal conductivity and structural integrity.
Primary Applications
-
Prueba de semiconductores: Validates ICs, CPU, and memory modules.
-
Aeroespacial & Defense: Mission-critical avionics and radar systems.
-
Telecom Infrastructure: High-speed data transmission equipment.
-
Dispositivos médicos: Precision diagnostic and imaging tools.
Material Advantages
FR4 HTg provides:
-
Resiliencia térmica: Stable performance under cyclic thermal stress.
-
Baja pérdida dieléctrica: Critical for high-frequency signal integrity.
-
Resistencia mecánica: Resists warping during multilayer lamination.
Características estructurales
-
Hybrid Stackup: Combines high-speed, power, and ground layers.
-
Tecnología de microvia: Laser-drilled microvias (8 mil) enable dense interlayer connections.
-
Controlled Impedance Traces: Minimizes crosstalk in 0.65mm BGA layouts.
Performance Highlights
-
Integridad de señal: <3% insertion loss at 10 GHz.
-
Power Handling: Supports 20A per power plane.
-
Gestión Térmica: 1.2 W/mK thermal conductivity via POFV.
Flujo de trabajo de fabricación
-
Material Prep: Cut FR4 HTg cores and prepreg sheets.
-
Perforación láser: Create 8-mil microvias with ±1 mil tolerance.
-
Enchapado & POFV: Electroplate vias and fill with conductive epoxy.
-
Back-Drilling: Remove excess via stubs using depth-controlled drills.
-
Laminación: Press 62 layers under high temperature/pressure.
-
Acabado superficial: Apply ENEG for solderability and oxidation resistance.
-
Pruebas: Validate impedance, continuity, and thermal cycling.
Ideal Use Cases
-
High-Frequency ATE Systems: Tests 5G RF components and millimeter-wave devices.
-
Multi-Site Testing: Parallel validation of 16+ DUTs on a single board.
-
Ambientes hostiles: Oil/gas exploration sensors and automotive ECU testing.