F4BMX-1/2 Teflon PCB Overview
F4BMX-1/2 is a high-performance laminate crafted by layering imported varnished glass cloth with Teflon resin and Polytrtrafluoroethylene film. This product adheres to scientific formulations and stringent technological processes, offering superior electrical performance compared to the F4B series. It features a broader range of dielectric constants, lower dielectric loss tangent, increased resistance, and more stable performance. The use of imported woven glass fabric ensures consistency in the properties of the laminate.
F4BMX-1/2 Technical Specifications
Aspetto
Meets the specification requirements for microwave PCB laminates according to national and military standards.
Tipi
- F4BMX217
- F4BMX220
- F4BMX245
- F4BMX255
- F4BMX265
- F4BMX275
- F4BMX285
- F4BMX294
- F4BMX300
Costante dielettrica
- F4BMX217: 2.17
- F4BMX220: 2.20
- F4BMX245: 2.45
- F4BMX255: 2.55
- F4BMX265: 2.65
- F4BMX275: 2.75
- F4BMX285: 2.85
- F4BMX294: 2.94
- F4BMX300: 3.0
Dimensioni (mm)
- Standard dimensions available: 300250, 380350, 440550, 500500, 460610, 600500, 840840, 8401200, 15001000, 18001000
- Customized dimensions are also available.
Spessore e tolleranza (mm)
| Spessore laminato | Tolleranza |
|---|---|
| 0.25 | ± 0,025 |
| 0.5 | ± 0,05 |
| 0.8 | ± 0,05 |
| 1.0 | ± 0,05 |
| 1.5 | ±0.075 |
| 2.0 | ± 0,09 |
| 3.0 | ±0.1 |
| 4.0 | ±0.1 |
| 5.0 | ±0.1 |
| 6.0 | ±0.12 |
| 8.0 | ±0.15 |
| 10.0 | ±0.18 |
| 12.0 | ±0.2 |
Nota: Lo spessore del laminato include lo spessore del rame. Customized laminates are available for special dimensions.
Resistenza meccanica
| Spessore(mm) | Warp massimo | Original Board | Lato singolo | Doppio lato |
|---|---|---|---|---|
| 0.25～ 0,5 | 0.030 | 0.050 | 0.025 | 0.020 |
| 0.8～ 1.0 | 0.025 | 0.030 | 0.020 | 0.020 |
| 1.5～ 2.0 | 0.020 | 0.025 | 0.015 | 0.015 |
| 3.0～ 5.0 | 0.015 | 0.020 | 0.010 | 0.010 |
Forza di taglio/punzonatura:
- For thickness <1mm, no burrs after cutting; minimum space between two punching holes is 0.55mm, Nessuna delaminazione.
- For thickness >1mm, no burrs after cutting; minimum space between two punching holes is 1.10mm, Nessuna delaminazione.
Forza di buccia (for 1oz copper):
- Stato normale: ≥18N/cm; No bubble or delamination peel strength: ≥15n/cm (in constant humidity and temperature, and kept in molten solder at 260 degree Celsius±2 degree Celsius for 20 secondi).
Chemical Property
The chemical etching method for PCB can be used without altering the dielectric properties of the laminate. Plating through holes requires sodium treatment or plasma treatment. Hot Air Level temperature must not exceed 253 degrees Celsius and cannot be repeated.
Electrical Property
| Nome | Condizione di prova | Unità | Valore |
|---|---|---|---|
| Densità | Stato normale | g/cm³ | 2.1～2.35 |
| Assorbimento di umidità | Dip in distilled water at 20±2°C for 24 ore | % | ≤0.08 |
| Temperatura operativa | Camera di temperatura ad alta bassa | gradi Celsius | -50°C～+260°C |
| Conducibilità termica | W/m/k | 0.3~0.5 | |
| Cte | Typical (εr :2.1~2.3) | ppm/° C. | X: 24(X), Y: 34(y), Z: 235(z) |
| Cte | Typical (εr :2.3~2.9) | ppm/° C. | X: 16(X), Y: 20(y), Z: 168(z) |
| Cte | Typical (εr :2.9~3.38) | ppm/° C. | X: 12(X), Y: 15(y), Z: 92(z) |
| Fattore di restringimento | 2 ore in acqua bollente | % | < 0.0002 |
| Resistività superficiale | DC, 500V, Stato normale | Mω | ≥2*10^5 |
| Under constant humidity and temperature | ≥8*10^4 | ||
| Resistività al volume | Stato normale | Mω · cm | ≥8*10^6 |
| Under constant humidity and temperature | ≥2*10^5 | ||
| Surface dielectric strength | Stato normale | d = 1mm(Kv/mm) | ≥1.2 |
| Under constant humidity and temperature | ≥1.1 | ||
| Costante dielettrica | 10GHz, εr | (± 2%) | See table below |
| Fattore di dissipazione | 10GHz tgδ | See table below |
Dielectric Constant and Dissipation Factor at 10GHz
| Tipo | Costante dielettrica (εr) | Fattore di dissipazione (Tgside) |
|---|---|---|
| F4BMX217 | 2.17 | – |
| F4BMX220 | 2.20 | – |
| F4BMX245 | 2.45 | – |
| F4BMX255 | 2.55 | – |
| F4BMX265 | 2.65 | – |
| F4BMX275 | 2.75 | – |
| F4BMX285 | 2.85 | – |
| F4BMX294 | 2.94 | – |
| F4BMX300 | 3.0 | – |
UGPCB Products and Services
UGPCB offers a variety of products including Radio/Microwave/High Frequency hybrid circuits, single layer to multilayer AnyLayerHDI, BGA, IC Heavy Copper Board, and custom solutions such as Rigid-Flex, ISU, Blind Buried Slotted Blind Back Drilled, and IC Carrier boards. Our services include PCB manufacturing, elettroplazione, e altro. For any inquiries, please contact us through our website www.ugpcb.com or email us at sales@ugpcb.com.