F4BK-1/2 Teflon Woven Glass Fabric Copper-Clad Laminates
F4BK-1/2 Teflon woven glass fabric copper-clad laminates is a composite of glass cloth, polytetrafluoroethylene resin and polytetrafluoroethylene, laminated in accordance with scientific formula and strict technological process. This product has certain advantages over the F4B series in terms of electrical performance (a wider range of dielectric constant).
技術仕様
外観
Meet the specification requirements for the laminate of microwave PCB by National and Military Standards.
Types
- F4BK225
- F4BK265
誘電率
- 2.25
- 2.65
Dimension(mm)
- 300*250
- 380*350
- 440*550
- 500*500
- 460*610
- 600*500
- 840*840
- 1200*1000
- 1500*1000 For special dimension, customized laminates are available.
厚さと寛容(mm)
| Laminate Thickness | 許容範囲 |
|---|---|
| 0.25 | ±0.025 |
| 0.5 | ±0.05 |
| 0.8 | ±0.05 |
| 1.0 | ±0.05 |
| 1.5 | ±0.05 |
| 2.0 | ±0.075 |
| 3.0 | ±0.09 |
| 4.0 | ±0.10 |
| 5.0 | ±0.10 |
The laminate thickness includes the copper thickness. For special dimensions, customized laminates are available.
機械的強度
ワープ
| 厚さ(mm) | Maximum Warp |
|---|---|
| Original board | Single side |
| 0.25～0.5 | 0.030 |
| 0.8～1.0 | 0.025 |
| 1.5～2.0 | 0.020 |
| 3.0～5.0 | 0.015 |
Cutting/Punching Strength
| Thickness1mm | No Burrs After Cutting | Minimum Space Between Two Punching Holes | No Delamination |
|---|---|---|---|
| 0.55mm | |||
| >1mm | 1.10mm |
はく離強度 (1oz copper)
- Normal state: ≥12N/cm; No bubbles or delamination. Peel strength ≥10N/cm (in constant humidity and temperature, and kept in melting solder at 260°C±2°C for 20 秒).
化学物質
According to the properties of the laminate, the chemical etching method for PCB can be used. The dielectric properties of the laminate are not changed. The plating through hole can be done but the sodium treatment or the plasma treatment must be used.
電気物質
| 名前 | テスト条件 | ユニット | 価値 |
|---|---|---|---|
| 密度 | Normal state | g/cm³ | 2.2～2.3 |
| Moisture Absorption | Dip in distilled water 20±2°C for 24 時間 | % | ≤0.1 |
| 動作温度 | High-low temperature chamber | ℃ | -50°C～+250°C |
| 熱伝導率 | W/m/k | 0.3 | |
| CTE (typical) | ppm/°C | ||
| εr :2.1~2.3 | 25(x), 34(y), 240(z) | ||
| εr :2.3~2.9 | 16(x), 21(y), 186(z) | ||
| Shrinkage Factor | 2 hours in boiling water | % | ≤0.0002 |
| 表面抵抗率 | M·Ω | ||
| Normal state | ≥3*10^4 | ||
| Constant humidity and temperature | ≥8*10^3 | ||
| 体積抵抗率 | MΩ・cm | ||
| Normal state | ≥2*10^6 | ||
| Constant humidity and temperature | ≥2*10^5 | ||
| Surface Dielectric Strength | d=1mm(Kv/mm) | ||
| Normal state | ≥1.2 | ||
| Constant humidity and temperature | ≥1.1 | ||
| 誘電率 | |||
| 10GHZ | εr | ||
| 2.25,2.65 | |||
| 損失係数 | tgside | ||
| ≤1.5*10^-3 |
This structured format ensures that each section is clearly defined and logically organized, making it easier to understand the key points and specifications of the F4BK-1/2 Teflon woven glass fabric copper-clad laminates.