UGPCB Elevates PCB and PCBA Precision with Advanced ADT-900XP2B X-ray Drilling Target Machine
In the rapidly evolving world of electronics manufacturing, precision and reliability are non-negotiable. As a leading provider of end-to-end PCB and PCBA soluções, UGPCB continuously invests in cutting-edge technology to meet the escalating demands for miniaturization and high-density interconnects. The recent addition of the ADT-900XP2B X-ray drilling target machine exemplifies this commitment, positioning UGPCB as the go-to partner for complex, alto desempenho placa de circuito fabricação.
What Is the ADT-900XP2B X-ray Drilling Target Machine?
The ADT-900XP2B is a state-of-the-art system designed for high-accuracy alignment and drilling em PCB multicamadas. By leveraging X-ray technology, it enables precise targeting of internal layers, ensuring flawless registration even in designs with microvias and buried components. Key features include:
-
Automated calibration capabilities for consistent performance.
-
Exceptional system stability to maintain tolerance levels under high-volume production.
-
Intelligent optimization software that adapts to design complexities.
-
High throughput capacity, reducing turnaround times without compromising quality .
This machine addresses one of the most critical challenges in Fabricação de placas de circuito impresso: aligning layers accurately to prevent signal integrity issues or board failures. With ±2 µm aperture tolerance and a minimum focal spot size of <8 µm, the ADT-900XP2B guarantees unparalleled precision .
How UGPCB Integrates the ADT-900XP2B into Its Workflow
At UGPCB, the ADT-900XP2B operates in synergy with other advanced equipment, such as the newly installed automated cutting and grinding lines. This integration creates a seamless pipeline:
-
Layer Preparation: Core materials and prepregs are trimmed and shaped using automated grinding systems for optimal surface uniformity.
-
X-Ray Drilling: The ADT-900XP2B identifies and drills targets with sub-micron accuracy, even in blind or buried vias.
-
Post-Drilling Inspection: In-house testing protocols validate layer-to-layer registration.
This workflow ensures that PCB multicamadas achieve up to 99.9% confiabilidade in alignment, critical for applications in aerospace, dispositivos médicos, and 5G infrastructure.
Technical Advantages of the ADT-900XP2B in PCB/PCBA Production
1. Superior Accuracy for High-Density Interconnect (IDH) PCB
The machine’s beam width of 1.9° (horizontal) and 20° (vertical) enables focused energy delivery, minimizing collateral damage to adjacent areas . This is vital for HDI PCB designs, where trace widths can be as narrow as 25 µm.
2. Enhanced Efficiency in Multi-Layer Board Fabrication
With a throughput of 24–42 turns per minute and a range scale of 0.125–96 NM, the ADT-900XP2B accommodates diverse panel sizes while maintaining speed . UGPCB leverages this to reduce lead times for prototype and mass-production PCBA orders.
3. Elevated Reliability in Complex Assemblies
The system’s closed 100 kV X-ray source and high-resolution detector (‹0.5 µm resolution) ensure that even the smallest misalignments are detected and corrected . This is especially beneficial for PCBs rígido-flexíveis, where layer registration is challenging.
Synergy with Automated Cutting and Grinding Lines
UGPCB’s new automated cutting and grinding lines complement the ADT-900XP2B by preparing materials to exact specifications. Por exemplo:
-
Precision grinding eliminates surface irregularities, ensuring uniform contact during lamination.
-
Automated cutting reduces human error in panel sizing, which is critical for maintaining impedance control in PCB de alta frequência.
Junto, these technologies enable UGPCB to achieve a dimensional tolerance of ±0.1 mm, far exceeding industry standards.
UGPCB’s Expertise in PCB and PCBA Manufacturing
Beyond equipment, UGPCB’s strength lies in its holistic approach:
-
Suporte de projeto: Engineers collaborate with clients to optimize designs for manufacturability.
-
Seleção de material: Partnerships with leading suppliers ensure the use of high-quality substrates and prepregs.
-
Rigorous Testing: In-circuit testing (TIC) and automated optical inspection (AOI) validate every Montagem PCBA.
The company’s expertise in multi-layer PCB fabrication e surface-mount technology (SMT) has made it a trusted partner for global brands.
Conclusão: UGPCB – Your Partner for Advanced PCB Solutions
The integration of the ADT-900XP2B X-ray drilling target machine and automated cutting/grinding lines underscores UGPCB’s dedication to innovation. By combining technology with deep industry knowledge, UGPCB delivers superior PCB and PCBA products that meet the highest standards of quality and reliability.
Experience the UGPCB advantage today! Contact us for quotes on precision PCB manufacturing ou turnkey PCBA services.