1. نظرة عامة على المنتج: A 6-Layer Hybrid PCB Balancing 5G RF Performance and Cost
Modern electronic devices often combine RF front-ends, high-speed digital signals, and power management on one board. Using expensive high-frequency materials for the entire board is neither economical nor necessary. This logic gave birth to theثنائي الفينيل متعدد الكلور الهجين عالي التردد.
UGPCB RO4835 + IT180 6-Layer High Frequency Hybrid PCB realizes this concept. It laminates Rogers RO4835 high-frequency laminate مع ITEQ IT180 high-Tg FR-4 material in a single stackup. The final board has 1.5mm total thickness, 1OZ finished copper, و 50 ohm characteristic impedance.
RF signal layers use RO4835 to ensure signal integrity. Power and control layers use IT180 to cut material cost and provide mechanical support. This hybrid approach reduces material cost by30%-50% compared to a full Rogers solution. RF performance remains nearly unchanged. This makes it the top choice for cost-sensitive mass production projects like 5G base stations, 77 رادار السيارات جيجا هرتز, and aerospace communications.
2. تعريف: What is “RO4835 + IT180 High Frequency Hybrid PCB”?
أثنائي الفينيل متعدد الكلور الهجين عالي التردد bonds two or more different dielectric materials into one multilayer board. The core idea is simple – use expensive high-frequency material only on RF signal layers. Use lower cost standard FR-4 on other layers for mechanical strength and lower cost.
RO4835 is a hydrocarbon/ceramic-filled thermoset high-frequency laminate from Rogers’ RO4000® series. It offers very low dielectric loss (مدافع = 0.0037 @ 10 GHz) وثابت عازل مستقر (دك = 3.48 ± 0.05). Unlike PTFE-based materials, RO4835 works with standard FR-4 processing. No special plasma etching or surface treatment is needed.
IT180 is a high-Tg lead-free epoxy FR-4 laminate from ITEQ. Its glass transition temperature (تيراغرام) is 175°C (طريقة كالوريمتر المسح الضوئي التفاضلي (DSC).). دك ≈ 4.1 ومدافع ≈ 0.016 في 10 GHz. IT180 offers excellent CAF resistance, انخفاض المحور Z CTE, and good through-hole reliability. It is widely used in automotive electronics, لوحات الكترونية معززة للاتصالات, and server motherboards.
Combining RO4835 and IT180 creates an electrically isolated and thermally compatible interface. RO4835 guarantees signal integrity. IT180 provides rigidity and cost advantages.
3. التصنيف العلمي (Per IPC and UL Standards)
According to IPC-4101 “Specification for Base Materials for Rigid and Multilayer Printed Boards”, هذا المنتج ينتمي إلىHybrid Multilayer PCB فئة.
- Per IPC-4103: RO4835 belongs to high frequency circuit laminates.
- Per IPC-4101C/126: IT180 belongs to high-Tg FR-4 laminates.
- نوع اللوحة: Rigid Multilayer PCB.
- عدد الطبقة: 6 طبقات (مؤشر التنمية البشرية options available).
- طلب: RF/Microwave PCB for RF front-ends, رادار الموجة المليمترية, and mixed-signal processing.
- الانتهاء من السطح: يوافق (electroless nickel immersion gold) for lead-free soldering and fine wire bonding.
4. Key Design Considerations for Hybrid Stackup
Designing a hybrid ثنائي الفينيل متعدد الكلور عالي التردد requires more than simply stacking RO4835 and IT180. Four design rules determine success.
4.1 Impedance Control and Dielectric Constant Matching
This product targets50 أوم characteristic impedance – the standard for RF and microwave systems. To achieve accurate 50Ω control, you must account for the Dk of both RO4835 and IT180 layers.
- RO4835 (طبقات إشارة الترددات اللاسلكية): دك = 3.48 ± 0.05 @ 10 GHz (قيمة العملية); دك = 3.66 (قيمة التصميم). يستخدم 3.66 for microstrip or coplanar waveguide geometry calculations to get the best impedance match.
- IT180 (inner/power layers): دك = 4.4 @ 1 ميغاهيرتز; دك = 4.1 @ 10 GHz. Avoid routing RF signals vertically across layers with different Dk values. Impedance steps cause signal reflections.
4.2 Managing CTE Mismatch
RO4835 in-plane CTE (X/Y axes) is 10–12 ppm/°C. Typical FR-4 CTE is about 17 جزء في المليون/درجة مئوية. The difference in thermal expansion can cause warpage, التصفيح, or even board bursting during lamination and reflow.
Common countermeasures include: keeping stackup symmetrical (same thickness and material type on top and bottom), using stepped lamination (gradual temperature and pressure rise), and adding anchoring copper in transition areas for mechanical constraint.
4.3 Layer Stackup and Signal Layer Assignment
For a 6-layer RO4835 + IT180 hybrid board, the recommended symmetrical stackup is:
| طبقة | مادة | وظيفة |
|---|---|---|
| طبقة 1 (قمة) | RO4835 | RF microstrip / antenna signal |
| طبقة 2 | Inner layer | مرجع الطائرة الأرضية |
| طبقة 3 | IT180 FR-4 core | Low-speed digital / قوة |
| طبقة 4 | IT180 FR-4 core | الطائرة الأرضية |
| طبقة 5 | Inner layer | مرجع الطائرة الأرضية |
| طبقة 6 (قاع) | RO4835 | RF microstrip / feed network |
This symmetrical design minimizes asymmetric warpage from thermal stress. Both top and bottom layers use RO4835 – a sandwich structure. The inner IT180 core provides rigidity and cost savings.
4.4 Isolating RF from Digital Signals
The Dk difference between RO4835 (~3.48) and IT180 (~4.1) هو على وشك 0.6. If a high-frequency signal crosses the hybrid interface, reflections and mode conversion will increase insertion loss significantly. لذلك, route all high-speed/RF traces only on RO4835 layers. Never route RF across the hybrid boundary into the IT180 region.
5. مبدأ العمل: Why RO4835 Excels at High Frequencies?
The core challenge of high-frequency circuits is simple: higher signal frequency means greater parasitic loss in the ثنائي الفينيل متعدد الكلور الركيزة. Two key parameters determine this loss – dielectric constant (DK) وعامل التبديد (ص).
5.1 ثابت العزل الكهربائي (DK)
Dk measures how much electrical energy the material can store. The smaller the Dk change across frequency, the better the impedance consistency over a wide bandwidth. RO4835’s Dk is3.48 ± 0.05 في 10 GHz (قيمة العملية). Its thermal stability is only 50 جزء في المليون/درجة مئوية من -50 درجة مئوية إلى 150 درجة مئوية. That means Dk barely drifts with temperature.
5.2 عامل التبديد (ص)
ص (ظل الخسارة) directly measures signal energy lost as heat in the dielectric. Lower Df means less lost energy. RO4835’s Df is only0.0037 في 10 GHz. For comparison, standard FR-4 has Df around 0.02 في 1 GHz. RO4835’s loss is about1/5 that of FR-4.
RO4835 achieves this low loss through its unique hydrocarbon/ceramic filler system. Hydrocarbon provides a low-polarity molecular backbone. Ceramic filler stabilizes mechanical dimensions and improves thermal conductivity. بعد المعالجة بدرجة حرارة عالية, the material forms a cross-linked thermoset network – which is exactly why RO4835 works with standard FR-4 PCB processes.
6. التطبيقات: Five Core Use Cases for RO4835 + IT180 Hybrid PCBs
The value of this hybrid PCB is not just in its electrical performance – but in its reliable operation under real-world conditions. Below are five major application areas.
6.1 5البنية التحتية للاتصالات
5G millimeter-wave bands (على سبيل المثال, n257/n258/n261, 24.25–29.5 GHz) demand very low PCB loss. According to a report by 360iResearch, the global 5G PCB market reached $22.3 مليار في 2025 ومن المتوقع أن تنمو ل $59.44 مليار من قبل 2032 بمعدل نمو سنوي مركب قدره 15.03%.
RO4835 + IT180 hybrid PCBs are used in 5G small cells, massive MIMO antenna arrays, ووحدات الواجهة الأمامية للترددات اللاسلكية. They control material cost in mass production while meeting strict insertion loss requirements.
6.2 77 رادار السيارات جيجا هرتز (مساعد مساعدة السائق المساعد)
Modern ADAS systems use 77 رادار الموجات المليمترية جيجا هرتز. This is one of the most representative applications for high frequency hybrid PCBs. RO4835’s Dk at 77 GHz is about 3.2 (down from 3.48 في 10 GHz). Combined with LoPRO® reverse treated copper foil, insertion loss is minimized.
IT180’s Tg of 175°C and T260 > 60 minutes provide high thermal reliability. This allows the radar module to survive harsh thermal cycling from -40°C to +125°C near the engine compartment.
6.3 Aerospace and Satellite Communications
Aerospace applications require مواد ثنائي الفينيل متعدد الكلور to remain reliable under vacuum, high radiation, and extreme temperatures. RO4835 offers 10 times better oxidation resistance than conventional thermoset materials. It also passes non-voiding delamination tests, making it a trusted choice for LEO satellite communication payloads and phased array antennas.
6.4 RF Power Amplifiers
In base station power amplifier (السلطة الفلسطينية) وحدات, RO4835’s low loss directly translates to higher output power and lower heat generation. Its thermal conductivity of 0.69 ث / م · ك (measured) quickly conducts heat away from PA chips to heat sinks, extending device lifetime.
6.5 High-Speed Mixed-Signal Boards
When a board contains high-speed ADCs/DACs, FPGAs, and RF front-end channels, crosstalk becomes a serious issue. The RO4835 + IT180 hybrid creates a natural dielectric constant barrier between RF and digital layers. This effectively suppresses digital noise coupling into RF paths.
7. مواد: Detailed Technical Specifications of RO4835 and IT180
The table below lists official key parameters for RO4835 and IT180 with test method references.
| المعلمة | RO4835 (روجرز) | IT180 (ITQ) | معيار الاختبار / مصدر |
|---|---|---|---|
| لا أعرف @ 10 GHz | 3.48 ± 0.05 (عملية) | 4.1 | IPC-TM-650 2.5.5.5 / 2.5.5.13 |
| لا أعرف @ 1 ميغاهيرتز | — | 4.4 | IPC-TM-650 2.5.5.9 |
| مدافع @ 10 GHz | 0.0037 | 0.016 | IPC-TM-650 2.5.5.5 / 2.5.5.13 |
| تيراغرام (DSC) | ≥280درجة مئوية | 175درجة مئوية | IPC-TM-650 2.4.24.3 |
| TD (5% فقدان الوزن) | 390درجة مئوية | 345درجة مئوية | ASTM D3850 / TGA |
| الموصلية الحرارية | 0.66–0.69 W/m·K | — | ASTM C518 / أستم D5470 |
| تصنيف القابلية للاشتعال | أول 94 V-0 | أول 94 V-0 | أول 94 |
| مقاومة الحجم | 5 × 10⁸ MΩ·cm | لIPC-4101 | IPC-TM-650 2.5.17.1 |
| CTE (X/Y axis) | 10 / 12 جزء في المليون/درجة مئوية | 11–13 / 13-15 جزء في المليون/درجة مئوية | IPC-TM-650 2.1.24 / تما |
| CTE (Z axis, a1) | 31 جزء في المليون/درجة مئوية | 45 جزء في المليون/درجة مئوية | IPC-TM-650 2.1.24 / تما |
| Moisture absorption | 0.05% | — | ASTM D570 |
Data accuracy note: All values above have been verified against official Rogers Corporation and ITEQ data sheets. The volume resistivity value 5×10⁸ MΩ·cm is from Rogers official documentation. Some earlier documents use 1.2×10¹⁰ Ω·cm which may result from unit conversion but does not change the conclusion that the material has excellent insulating properties.
8. ميزات الأداء
Based on the technical parameters above, this high frequency hybrid PCB offers five core advantages:
- Very low signal loss: مدافع = 0.0037 @ 10 GHz – about 1/5 of ordinary FR-4. In 5G mmWave bands, this means longer transmission distance, lower errors, and less heating.
- ثابت عازل مستقر: دك = 3.48 ± 0.05 @ 10 GHz. Very stable over wide frequency and temperature ranges. Ensures accurate 50Ω impedance under all operating conditions.
- Excellent heat and oxidation resistance: RO4835 has 10 مقاومة الأكسدة أفضل مرات من المواد الحرارية التقليدية. It works long-term in high-temperature air without significant degradation.
- Superior manufacturability: No special surface treatment (like plasma etching) needed. Fully compatible with standard FR-4 processes. This shortens lead times significantly.
- Cost-effective design: Only RF critical layers use RO4835. Inner layers use IT180. Material cost is about 30%–50% lower than a full Rogers solution under the same electrical constraints.
9. عملية التصنيع: 8 Key Steps from Material to Finished Board
A qualified RO4835 + IT180 high frequency hybrid PCB goes through the following eight critical processes:
① Incoming material inspection – Sample test Dk/Df consistency of RO4835 and IT180 batches. Ensure parameters meet Rogers and ITEQ official specifications.
② Inner layer circuit formation – Pattern transfer and etching on IT180 layers for digital signal lines and power/ground planes.
③ Brown oxide treatment – Chemically roughen inner layer copper surfaces. Improve adhesion with prepreg during lamination.
④ Lamination – The most critical step. Stack RO4835, prepreg, and IT180 cores in a symmetrical stackup. Load into a vacuum press. Precisely control temperature ramp rate, pressure curve, and dwell time to minimize stress from CTE mismatch. For this 6-layer product, single high-temperature lamination is typical. HDI designs use sequential lamination.
⑤ Drilling – Use solid carbide drills or laser drilling. Optimize parameters for 1.5mm board thickness to ensure hole wall roughness meets PTH copper plating requirements.
⑥ Electroless copper / طلاء لوحة – Metallize through-holes. Establish electrical interconnection between layers.
⑦ Outer layer circuit formation – Fabricate 50Ω impedance microstrip lines or RF traces on top and bottom RO4835 layers. Use controlled impedance etching to keep trace width tolerance within ±5%.
⑧ Surface finish - يوافق (electroless nickel immersion gold) for lead-free soldering and fine wire bonding. Typical gold thickness 0.05–0.1 μm. سمك النيكل 3-5 ميكرومتر.
⑨ Electrical test and flying probe - 100% electrical test including open/short and TDR impedance test. Ensure each board meets 50Ω impedance tolerance.
10. Physical Structure of the 6-Layer Hybrid Board
Below is the physical construction of UGPCB’s RO4835 + IT180 6-layer board (من أعلى إلى أسفل):
| غرض | عنصر | مادة | سمك نموذجي | وظيفة |
|---|---|---|---|---|
| 1 | Top copper foil | إد النحاس (LoPRO® optional) | 1 أوقية (≈35 ميكرومتر) | Outer layer signal / هوائي |
| 2 | Top dielectric | RO4835 | 0.127 مم | High frequency signal insulation |
| 3 | Inner copper (L2/L5) | نحاس | 1 أوقية | مرجع الطائرة الأرضية |
| 4 | Mid core | IT180 FR-4 | Per stackup design | Digital signal / طبقة الطاقة |
| 5 | Mid core | IT180 FR-4 | Per stackup design | الطائرة الأرضية |
| 6 | Inner copper (L3/L4) | نحاس | 1 أوقية | Inner routing / قوة |
| 7 | Bottom dielectric | RO4835 | 0.127 مم | High frequency signal insulation |
| 8 | Bottom copper foil | إد النحاس (LoPRO® optional) | 1 أوقية (≈35 ميكرومتر) | Bottom signal / feed network |
| 9 | الانتهاء من السطح | يوافق | 0.05-0.1 ميكرومتر (الاتحاد الأفريقي) | Solderability and oxidation resistance |
Total board thickness is 1.5 mm including all copper and dielectric layers.
11. Product Selection Quick Reference
| المعلمة | مواصفة | Customizable Range |
|---|---|---|
| Laminate combination | روجرز RO4835 + ITEQ IT180 | 4350 مليار ريال عماني + FR-4 or other ITEQ series |
| عدد الطبقات | 6 طبقات | Expandable to 4/6/8/10 layers plus HDI |
| سمك اللوحة | 1.5 مم | 0.8–3.0 mm (based on layer count and stackup) |
| سمك النحاس | انتهى 1 أوقية | 0.5 أوقية / 1 أوقية / 2 أوقية |
| التحكم في المعاوقة | 50 أوم (single-ended) | Differential 90Ω/100Ω and others |
| سمك العزل الكهربائي | 0.127 مم | Based on stackup requirements |
| DK (RO4835 @10 GHz) | 3.48 ± 0.05 | Material-dependent |
| ص (RO4835 @10 GHz) | 0.0037 | Material-dependent |
| تصنيف القابلية للاشتعال | أول 94 V-0 | Required |
| الانتهاء من السطح | يوافق | OSP, القصدير الغمر, غمر الفضة |
12. Why Choose UGPCB for Your Hybrid PCB Needs?
UGPCB has deep engineering experience in high frequency hybrid PCBs. We help customers avoid common risks like material incompatibility, layer delamination, and reliability test failures. Our core strengths include:
- ✅ Solid high-frequency design support – From impedance calculation (using Rogers MWI and Polar SI9000) to CTE stress simulation of stackups.
- ✅ Precise process control – X-ray real-time alignment and AOI ensure layer-to-layer registration within ±3 mil.
- ✅ Batch consistency – Even in mass production, RO4835 Dk batch variation stays within ±0.05. 50Ω impedance yield exceeds 98%.
- ✅ Fast response and on-time delivery – Strategic inventory of Rogers and ITEQ raw materials. Lead time for hybrid quick-turn PCBs is as short as 7–10 working days.
اطلب عرض أسعار الآن
The RO4835 + IT180 high frequency hybrid PCB is the best solution for balancing performance and cost. Whether you are designing a 5G small cell or qualifying a 77 GHz radar module for mass production, UGPCB provides one-stop service from engineering validation to volume manufacturing.
📧Contact UGPCB Engineering Team: sales@ugpcb.com
📞Technical Hotline: +86-XXX-XXXXXXX
🌐زيارة موقعنا على الانترنت: www.ugpcb.com
【Get Your Custom Quote Now】
Please provide the following information:
- PCB layer count and target board thickness
- Number of RF layers and frequency range
- Estimated annual volume (النموذج الأولي / دفعة صغيرة / إنتاج متسلسل)
- Impedance control requirements (single-ended/differential, target value and tolerance)
- Any special process requirements (الحفر الخلفي, buried/blind vias, حفر عمق يمكن التحكم فيه, إلخ.)
سوف يستجيب فريق UGPCB الهندسي في الداخل 24 hours with technical support and a detailed quote.
*All technical data in this document come from Rogers Corporation official data sheet (DS RO4835) and ITEQ IT-180A technical specification. Test methods follow IPC-TM-650 series and applicable ASTM standards. Market data source: 360iResearch “5G Printed Circuit Board Market” تقرير (January 2026). UGPCB is responsible for the accuracy and timeliness of the data. For any technical questions, please contact our engineering team for confirmation.*
