Projeto de PCB, Manufatura de PCB, PCBA, PECVD, e seleção de componentes com serviço único

Download | Sobre | Contato | Mapa do site

Placa PCBA de circuito de rastreador GPS - UGPCB

Engenharia reversa de PCB/

Placa PCBA de circuito de rastreador GPS

Nome: Placa PCBA de circuito de rastreador GPS

O número de camadas que podem ser copiadas: 1-32 camadas

Largura mínima de linha e espaçamento de linha: 3mil

Abertura mínima do laser: 4mil

Abertura mecânica mínima: 8mil

Espessura da folha de cobre: 18-175cm (padrão: 18CM35CM70CM)

Força de casca: 1.25N/mm

Diâmetro mínimo do orifício de perfuração: lado único: 0.9mm/35mil

Diâmetro mínimo do orifício: 0.25mm/10mil

Tolerância à abertura: ≤ 100,8 mm ± 0,05 mm

Tolerância ao orifício: ± 0,05 mm

  • Detalhes do produto

Overview of GPS

What is GPS?

The Global Positioning System (GPS) is a high-precision radio navigation positioning system based on artificial earth satellites. It can provide accurate geographic location, vehicle speed, and precise time information.

Benefits of GPS

Since its inception, GPS has attracted many users with its high precision, all-weather, global coverage, convenience, and flexibility. GPS is not only the patron saint of automobiles but also the wisdom of logistics industry management.

GPS in the Logistics Industry

Importance in Logistics

With the rapid development of the logistics industry, GPS has played a pivotal role and has become the second largest consumer group after the automobile market.

GPS PCB Antennas

Types of GPS PCB Antennas

GPS PCB antennas come in two forms: active and passive.

Active Antennas

Active antennas have a low noise amplifier (LNA) built into the module. They are on their own board and are connected to your printed circuit board via coaxial cables.

Passive Antennas

Passive antennas do not include an amplifier.

Próximo:

Deixe uma resposta

Deixe um recado