Projeto de PCB, Manufatura de PCB, PCBA, PECVD, e seleção de componentes com serviço único

Engenharia reversa de PCB/

Placa de cópia do equipamento de controle PCBA WiFi PCBA

Nome: Placa de cópia do equipamento de controle PCBA WiFi PCBA

The number of layers that can be copied: 1-32 camadas

Minimum line width and line spacing: 3mil

Minimum laser aperture: 4mil

Minimum mechanical aperture: 8mil

Copper foil thickness: 18-175цm (padrão: 18цm35цm70цm)

Força de casca: 1.25N/mm

Minimum punching hole diameter: single side: 0.9mm/35mil

Diâmetro mínimo do orifício: 0.25mm/10mil

Aperture tolerance: ≤φ0.8mm±0.05mm

Hole tolerance: ±0.05mm

Hole wall copper thickness: double-sided/multi-layer: ≥2um/0.8mil

Hole resistance: double-sided/multi-layer: ≤300цΩ

Largura mínima da linha: 0.127mm/5mil

Minimum pitch: 0.127mm/5mil

Tratamento de superfície: rosin spray tin electric gold, anti-oxidation, chemical gold, carbon oil

Warpage: ≤0.7%

UGPCB provides a one-stop solution from WiFi PCB manufacturing to WiFi module assembly services.

All WiFi module prototype PCB assembly services are available in either a 2.4 GHz or 5 GHz version.

These services support both chip antennas and external antennas.

Using our schematics as reference designs, module designs can be integrated into customer carrier board designs.

Anterior: Placa PCBA de circuito de rastreador GPS

Próximo: Placa de cópia da placa de energia de controle industrial

Deixe um recado