UGPCB High-Performance 1L+1L Rigid-Flex PCB: The Ultimate Solution for Dynamic Bending and Precision Circuitry

1. 製品の概要: Technology Trends in Rigid-Flex PCBs

The リジッドフレックスPCB combines rigid board strength with flexible circuit adaptability. Market data shows the global rigid-flex PCB market reached RMB 19.061 10億インチ 2026. It will reach RMB 27.545 10億 2033, growing at a 5.40% CAGR. This growth comes from aerospace, 医療機器, 自動車エレクトロニクス, および家庭用電化製品. These sectors need high-density interconnect (HDI) and 3D space optimization.

UGPCB leverages over ten years of manufacturing experience. We follow IPC-6013E for flexible and rigid-flex board qualification. Our 1L+1L rigid-flex PCB uses an FR4+PI composite core. It supports prototype to mass production. This product leads in dynamic bend life, fine-line processing, and plated through-hole (PTH) metallization. It is an ideal interconnect carrier for high-performance electronic devices.

2. Definition and Classification of Rigid-Flex PCBs

2.1 意味

あ リジッドフレックスPCB integrates rigid and flexible substrates through lamination. The rigid area (FR4) supports high-density 成分 配置. The flexible area (PI) enables 3D folding and dynamic bending. It replaces traditional board-to-board connectors and wiring harnesses. According to IPC-2223, rigid-flex multilayer boards can include plated through-holes, マイクロバイアス, and blind/buried vias. They can form HDI レイヤー.

2.2 科学的分類

Based on bending characteristics, rigid-flex PCBs fall into two categories:

UGPCB’s 1L+1L rigid-flex PCB belongs to the dynamic flex type. Its flexible area uses precision lamination and stress optimization. It withstands over 100,000 ダイナミックベンド (meeting IPC-6013D Class 3). This ensures long-term reliability for demanding applications like consumer and automotive electronics.

3. 作業原則: Interconnection Mechanisms

Two key mechanisms enable rigid-flex PCB operation: stress relief at the rigid-flex interface and electrical interconnection through plated holes.

3.1 Stress Relief at the Rigid-Flex Transition Zone

FR4 and PI have different coefficients of thermal expansion (CTE) and elastic moduli. FR4’s CTE is 14–17 ppm/°C (X-Y direction). PI’s CTE is 12–16 ppm/°C. Under thermal cycling, they generate different thermal stresses. UGPCB uses stepped openings and low-flow prepreg. This gradually thins the rigid layer in the transition area. It spreads peak stress over a larger zone, avoiding single-interface stress concentration.

3.2 Mechanical Design Rules for Bend Area

IPC-2223 states that the minimum bend radius for dynamic applications must follow:
R ≥ 6T
where R = minimum bend radius, T = total thickness of flexible area. For dynamic use, set R to 6–10 times T. When R reaches 100T, dynamic bend life can exceed 1 million cycles. This satisfies foldable phone requirements.

3.3 Electrical Interconnection via Plated Holes

メッキスルーホール (PTH) and microvias provide layer-to-layer connections. Copper electroplating grows uniformly on hole walls, creating low-impedance paths. IPC-TM-650 2.1 requires resistance between vias ≤ 0.5Ω. Minimum insulation resistance ≥ 100MΩ. Dielectric strength must pass 1500VAC testing.

4. Technical Parameters and Performance Specifications

4.1 主要なパラメータ

*Data source: IPC-6013E, IPC-4562, IPC-4552. The 2μ-inch gold thickness meets IPC-4552 Class 2/3 ENIG recommendations.*

4.2 Performance Advantages of FR4+PI Composite

FR4 (硬い) properties per IPC-4101:

• 誘電率 (DK): 4.2–4.8 (1MHz)

• 散逸係数 (Df): 0.015–0.025

• ガラス遷移温度 (TG): 130–140°C (standard FR4); high-Tg type >170℃

• 熱伝導率: 0.25–0.35 W/m·K

• Flammability rating: UL94V-0

PI (フレキシブル) properties per IPC-4204:

• DK: 3.2–3.6 (1MHz)

• Df: 0.002–0.005

• TG: ≥260°C

• Elongation at break: ≥50%

• Short-term temperature resistance: >300℃

PI performs much better at high temperatures than FR4. FR4’s Tg is ~120°C, and even high-performance FR4 reaches only 180–190°C. PI’s Tg exceeds 260°C. PI also offers good flexibility, copper peel strength, 耐薬品性, and dimensional stability in high-temperature uses. しかし, PI absorbs more moisture (について 1.6%) than FR4. Control humidity during lamination and storage.

4.3 2OZ Thick Copper for High Current Capacity

2OZ copper (≈70μm) carries about twice the current of 1OZ (≈35μm). IPC-2221の場合, a 1mm wide trace with 2OZ copper handles 5–6A at 10°C temperature rise. This suits power management modules and power electronics. UGPCB uses rolled annealed copper. It provides excellent bend fatigue life in the flexible area, それを超える 100,000 dynamic cycles.

4.4 ENIG Surface Finish

同意する (エレクトロレスニッケルイマージョンゴールド) has a 2μ-inch gold thickness (~0.05μm). Benefits include:

• Excellent solderability: Gold protects nickel from oxidation, ensuring reliable SMT soldering.

• High flatness: Suitable for fine-pitch BGA and QFP packages.

• Strong corrosion resistance: Gold is chemically inert, preventing oxidation during long-term storage.

• Compliant with IPC-4552: Nickel thickness ≥3μm, gold thickness 0.05–0.1μm.

[画像: Micrograph of ENIG surface showing uniform gold layer over nickel]
ALT tag: ENIG surface finish cross-section with 2μ-inch gold layer on nickel for rigid-flex PCB

5. Precision Circuit Processing: 3mil/3mil Line and 0.2mm Microvia

5.1 3mil/3mil Line Width/Space Capability

Our product achieves 3mil (≈76μm) minimum line width and space. This falls under HDI. IPC-6013E Class 3 for high reliability requires a minimum tolerance of 50μm (~2mil). Our 3mil/3mil accuracy fully meets high-reliability rigid-flex PCB manufacturing requirements.

UGPCB uses these technologies:

• レーザー直接イメージング (LDI): Imaging accuracy ±15μm, eliminating film expansion/shrinkage errors.

• Precision etching control: Etching factor ≥3.0, line width tolerance ≤±15%.

• あおい 100% 検査: Automated optical inspection covers >99.9% of the panel.

5.2 0.2mm Microvia Drilling

Minimum hole diameter is 0.2mm (~8mil). This meets HDI rigid-flex board needs. We use CNC mechanical drilling or a CO₂/UV laser combination to handle various hole sizes.

6. 特殊加工: Resin Plugging + Copper Cap Plating

6.1 Process Overview

We use the “resin plugging + copper cap plating” combination. This is IPC-4761 Type VI: Filled and Capped. 初め, fill the via with resin and cure it. Then plate copper over the surface. This creates a completely flat via surface. It is widely used in HDI and 剛体ボード.

6.2 Process Steps

1. 掘削 – Drill target-diameter vias in copper-clad laminate.

2. Electroless copper + panel plating – Deposit thin copper on hole walls, then thicken by panel plating.

3. Resin plugging – Use vacuum plugging equipment to fill vias with low-shrinkage resin.

4. 硬化 – Bake at 150–170°C to fully harden the resin.

5. Grinding – Remove excess resin from board surface to make vias flush with the surface.

6. Copper cap plating – Electroplate a copper layer over the ground resin surface to ensure solderability and conductivity.

6.3 Advantages and Value

Compared to solder mask plugging or ink plugging, this process offers:

• Excellent flatness: Height tolerance after grinding ≤ ±20μm, suitable for BGA and fine-pitch components.

• 高い信頼性: Resin filling plus copper cap prevents “popcorning” または “blow holes” during soldering.

• Increased routing density: You can route traces over plugged vias, greatly improving HDI board utilization.

• Strong thermal stress resistance: Cured resin CTE (25–40 ppm/°C) matches FR4, reducing cracking under thermal cycles.

7. 製造工程: UGPCB’s Full Quality Control

UGPCB monitors every step of 1L+1L rigid-flex PCB production. All processes comply with IPC標準.

1. IQC incoming inspection – FR4 per IPC-4101; PI flex copper-clad laminate per IPC-4204; copper foil per IPC-4562.

2. Inner layer circuit – Flexible layer pattern transfer → etching → AOI.

3. ラミネート加工 – Press FR4 and PI layers with low-flow prepreg at high temperature and pressure.

4. 掘削 – CNC mechanical drilling (0.2mm min.) + レーザー穴あけ (オプション).

5. PTH metallization – Electroless copper + panel plating. Hole wall copper meets IPC-6012 Class 3.

6. Resin plugging + copper cap plating – Per IPC-4761 Type VI.

7. Outer layer circuit – LDI → pattern plating → etching → AOI 100%.

8. 表面仕上げ – ENIG, 2μ-inch gold, per IPC-4552.

9. プロファイリング – Precision die punching or CNC routing. Flexible area contour tolerance ±50μm.

10. Electrical test - 飛行プローブ or universal grid fixture. 100% continuity test.

11. Reliability tests – Bend cycle (IPC-TM-650 2.4.3), thermal cycle (–55°C to 125°C, 1000 サイクル), high temperature/humidity (85℃/85%相対湿度, 1000 時間).

12. FQC final inspection + packaging and shipping.

8. Quality and Reliability Verification Based on IPC Standards

8.1 IPC-6013 Performance Classes

IPC-6013 defines three classes for rigid-flex boards:

UGPCB’s 1L+1L rigid-flex PCB satisfies all performance requirements of IPC-6013D/E Class 3.

8.2 Bend Life Test (IPC-TM-650 2.4.3)

This test uses a 0.5mm radius bending fixture. It performs 180° reciprocating bends at 30–60 cycles per minute. UGPCB’s flexible area survives >100,000 dynamic bends with no circuit damage. This meets IPC-6013D Class 3 for high-reliability dynamic applications. The industry’s best designs can exceed 1 million cycles when the bend radius increases to 100T.

8.3 Thermal Cycle Test

Per IPC-TM-650 2.6.7.2, samples undergo 1000 cycles from –55°C to 125°C. Each cycle has a 15-minute dwell time. Transfer time does not exceed 5 分. テスト後, cross-section analysis shows no cracks in the hole wall copper and no resin delamination. This confirms the thermomechanical reliability of the FR4-PI lamination interface.

8.4 High Temperature/Humidity Bias Test (85℃/85%相対湿度)

Per IPC-TM-650 2.6.3.3, samples sit at 85°C and 85% relative humidity with bias for 1000 時間. The insulation resistance changes by less than one order of magnitude. No significant conductive anodic filament (CAF) formation occurs. This verifies the long-term electrical stability of FR4 and PI in humid environments.

9. Application Scenarios and Use Cases

9.1 航空宇宙

Rigid-flex PCBs are ideal for aerospace electronics because they save weight and space and resist high vibration. 代表的な用途: satellite deployable antennas, onboard flight computers, ミサイルガイダンスシステム. IPC-6013DS aerospace-grade standards demand strict material traceability and reliability.

9.2 医療機器

In endoscopes, implantable devices, and wearable health monitors, rigid-flex PCBs combine signal transmission with mechanical movement thanks to >10,000 dynamic bend cycles and high-density integration.

9.3 家電

Foldable smartphones, AR/VR glasses, laptop hinge connections – rigid-flex PCBs can achieve bend radii as low as 1mm, enabling ultra-thin foldable designs. Foldable phone hinges typically use 1L or 2L rigid-flex boards requiring 100,000–200,000 dynamic bend cycles. Our product fully meets this requirement.

9.4 カーエレクトロニクス

Advanced driver-assistance systems (アダス), 自動車カメラモジュール, millimeter-wave radar sensors – rigid-flex PCBs withstand –40°C to +150°C extremes and meet AEC-Q200 automotive grade. They support high-frequency applications like 77GHz radar.

9.5 産業管理

Robot joint controllers, industrial camera flexible connections, servo drives – rigid-flex PCBs replace traditional wiring harnesses and connectors. This reduces system BOM cost by 45% while improving mechanical reliability.

10. Why Choose UGPCB’s Rigid-Flex PCB?

10.1 Technical Advantages Summary

• ✅ FR4+PI composite – balances cost and performance for rigid-flex needs.

• ✅ 2OZ thick copper – high current capacity for power circuits.

• ✅ 3mil/3mil precision lines – high-density routing for complex circuits.

• ✅ 0.2mm microvias + resin plugging + copper cap – flat via surface supports BGA assembly.

• ✅ >100,000 dynamic bend life (IPC-6013Dクラス 3).

• ✅ ENIG finish (2μ-inch gold) – excellent solderability and storage life.

• ✅ IPC-6013E Class 3 compliance – aerospace, 医学, military-grade reliability.

• ✅ 1.6mm finished thickness – standard thickness compatible with mainstream SMT lines.

10.2 Full-Process Service Commitment

UGPCB provides end-to-end support: Gerber review → DFM analysis → prototyping → mass production → PCBA one-stop service. We promise:

• Fast prototyping: 1L+1L rigid-flex PCB samples in 5–7 working days.

• 100% 電気試験: Every product undergoes flying probe or fixture testing before shipment.

• Complete shipment reports: Includes cross-section analysis, bend life test report, thermal cycle test report, impedance test report, and UL certificate.

11. Get a Quote and Technical Support

UGPCB delivers high-performance rigid-flex PCB solutions to global customers. Whether you are in proof-of-concept or need high-volume production, our engineering team provides customized design optimization and DFM review based on your specific needs.

Contact us for a quote or technical consultation:

• 🌐 Website: www.ugpcb.com

• 📧 Email: sales@ugpcb.com

• 📞 Phone/WhatsApp/WeChat: +86-19072115165

Act now! Email your Gerber files and design requirements. UGPCB engineers will provide a DFM review report and competitive quote within 4 時間. UGPCB – Your professional partner for high-performance rigid-flex PCBs.