Huawei RRU3908 Conjunto de PCB da estação base

Base Station PCB Assembly

Central Processing Units

Network communication is handled by a Freescale MPC8321 PowerQUICC2 CPU which runs at 200 MHz and has 2x 256 MB Hynix DDR2 RAM. It utilizes a PMC QuadPHY 10 GB controller for the two optical input / saída.

Decoding and encoding of the single bit streams for ADC and DAC are handled by the 3 Altera Cyclone III FPGA and the custom Huawei SD6151RBI controllers.

The single bit streams are treated by the Texas Instrument TMS320 series DSP CPUs:

• TMS320C6410: A fixed-point DSP that only calculates with integer numbers.
• TMS320CT16482: UM 1 GHz DSP CPU that calculates floating point numbers.

Receive Part

The input signal comes in two out of phase lines and is first treated by a Skyworks SKY73021-11 1.7 para 2.2 GHz downconversion mixer to get the frequency from 2.2 GHz to 550 MHz.

• Local Oscillator: An Analog Devices ADF4110B.
• SIPAT SAW Filter: Used for isolation.
• Variable Gain Amplifiers: Analog Devices AD8376, used before the signal lines split out into either a 3G ADC line or 4G ADC line.

3G Line

The analog to digital conversion is handled by the Analog Devices AD6655-10, a 14-bit 150 MSPS chip specifically targeted for 3G base stations.

4G Line

The 4G line has a few more components:

• 2 MCL HSWA+1110 SPDT RF Switch: Feeds into 2 Maxim MAX2039E up/downconversion mixer.
• ADC: Analog Devices AD9230-11-200, a 11-bit 200 MSPS chip.

All timing is handled by the Analog Devices AD9516-3, a 14-output clock generator with a built-in 2 GHz local oscillator.

Transmit Part

The single bit datastream from the Altera Cyclone III FPGA is handled by 2 Analog Devices TxDAC AD9788, specified for 16-bit 800 MSPS.

• Upconversion Modulators: 2 Analog Devices ADL5375-05, with a range from 400 MHz to 6 GHz.
• Ceramic Resonator Band Pass Filter: 5 staged.
• Signal Phase Switching: Transistors and EMC Technology & Florida RF Labs HPJ2F hybrid couplers.
• Pre-Amplifier: Freescale MMG3004NT1 high linearity amplifier, capable of 17 dB amplification in the range of 400 MHz to 2.2 GHz.

Signal Strength Control

To control the signal strength, a MCL 31R5 digital step attenuator sits before the output connector. This is a 31.5 dB attenuator that can work in 0.5 dB steps from a 6-bit serial control interface.

Power Amplifier

The power amplifier uses two stages:

• First Stage: Infineon PTMA180402FL 40 Watt RF LDMOS, feeding two 90 degree out of phase signals to the output stage transistors through a Xinger II XC1900A-03S hybrid coupler.
• Output Stage Transistors: NXP BLF6G20LS-140 140 Watt RF LDMOS.
• Recombination: In a Xinger II XC1900A-03S hybrid coupler before leaving to the diplexer through a circulator.

UGPCB Support for Huawei RRU3908 Base Station PCB Assembly

UGPCB supports Huawei RRU3908 base station PCB Assembly business. Somos uma fábrica profissional de montagem completa de PCBA. Welcome to place an order.