UGPCB High-End Epoxy Resin Plugged Rigid-Flex PCB: 16L Rigid + 2L Flex All-in-One Solution

---

As digital electronics evolve toward higher integration, lighter weight, and uncompromised reliability, Жесткие платы have become the critical backbone for complex circuit systems. When space constraints and signal integrity are paramount, объединение epoxy resin plugging with rigid-flex technology represents the gold standard for high-density interconnect solutions.

UGPCB leverages advanced manufacturing to deliver an Epoxy Resin Plugged Rigid-Flex PCB built on a ФР4 + ПИ material platform. Featuring a 16L Rigid + 2L Flex строительство, this board is specifically engineered for demanding digital products, offering the mechanical strength of rigid boards alongside the dynamic flexing capability of flexible circuits.

1. Обзор продукта & Определение

Ан epoxy resin plugged rigid-flex PCB is a hybrid circuit board that integrates rigid PCB sections and flexible PCB sections into a single, unified structure through lamination. This specific product combines 16 rigid layers (ФР4) с 2 flexible layers (ПИ). The rigid section’s vias are filled using a specialized epoxy resin plugging process.

This design retains the bendability of the flex area while eliminating common rigid-flex failure points like “solder blow-out” or trapped air expansion during SMT assembly. The result is a highly reliable монтажная плата optimized for modern, compact digital devices.

2. Материалы & Stack-Up Architecture

The product’s performance relies on precise material selection and structural engineering:

• Базовые материалы:

  • Rigid Section: ФР4 (Glass-reinforced epoxy laminate). This material offers high mechanical strength, отличная термическая стабильность, и электрическая изоляция (meets UL 94 В-0 Рейтинг воспламеняемости), providing a stable foundation for component mounting.

  • Flex Section: ПИ (Полиимид) фильм. Known for its exceptional heat resistance (operating range: -200°C to +300°C), outstanding dynamic flex life (millions of cycles), и низкая диэлектрическая постоянная, PI is ideal for dynamic flexing applications.

• Stack-Up Configuration:

  • Всего слоев: 16L Rigid + 2L Flex (Equivalent to an 18-layer circuit)

  • Толщина меди: 1 ОЗ. As per IPC-4562, 1 OZ copper finished thickness is approximately 35мкм. This provides an optimal balance between current-carrying capacity and fine-line etching capability.

  • Толщина готовой доски: 1.0мм. Achieving this thickness in an 18-layer stack demonstrates advanced lamination precision, meeting the industry’s demand for ultra-slim profiles.

  • Поверхностная отделка: Погружение Золото (СОГЛАШАТЬСЯ). Conforming to IPC-4552, ENIG offers a flat surface, отличная паяемость, and superior oxidation resistance, making it ideal for fine-pitch component assembly.

3. Epoxy Resin Plugging: Принцип работы & Соображения дизайна

3.1 Принцип работы

In a multilayer rigid-flex PCB, vias electrically connect different layers. In traditional designs, unplugged vias can trap air. During high-temperature processes like lead-free reflow (peak temperatures around 245°C–260°C), this trapped air expands, potentially causing “popcorning,” delamination, or solder ball splatter.

The epoxy resin plugging process uses vacuum printing or injection to fill mechanical drilled holes (minimum size 0.2мм) with a high-viscosity, low-CTE (Коэффициент термического расширения) эпоксидная смола. After filling, the board undergoes thermal curing and surface planarization, making the via surface flush with the board surface.

3.2 Соображения дизайна

• Aspect Ratio Control: For a 0.2мм minimum finished hole size, соотношение сторон (толщина доски зависит от диаметра отверстия) must be controlled to ensure void-free filling. With a 1.0mm board thickness, the aspect ratio is 5:1, well within UGPCB’s stringent process capabilities.

• Trace/Space Capability: This product supports 4мил/4мил (0.1мм/0,1 мм) fine-line circuitry. В соответствии с МПК-2221, such precision allows for high-density interconnects. The plugging process is carefully managed to not compromise the insulation distance between these fine traces.

4. Классификация продуктов

Based on IPC-6013, the qualification and performance specification for flexible and rigid-flex boards, this product’s scientific classification is:

• Structural Type: Тип 4 (Жесткий флекс Multilayer Board)

• Performance Class: Сорт 3 (Высоконадежная электронная продукция). This class is for products where continued performance is critical, например, медицинское оборудование, промышленное управление, and high-end digital consumer goods. It demands a high level of assurance and proven reliability.

5. Производственный процесс & Контроль качества

UGPCB follows МПК-А-600 standards for manufacturing and acceptance. The core process includes:

1. Визуализация внутреннего слоя: Fine-line circuitry is patterned on both PI and FR4 substrates, with strict control over the 4mil trace/space geometry.

2. Coverlay Lamination: PI coverlay is applied to the flex areas to protect circuits and enhance flex life.

3. Window Cutting & Lay-up: Rigid sections are windowed to expose flex areas, followed by precise alignment and lay-up.

4. Ламинирование: High temperature and pressure fuse the multilayer stack. This step is critical to avoid wrinkles or separation at the rigid-flex interface.

5. Механическое бурение: 0.2мм micro vias are drilled with positional accuracy held within ±0.05mm.

6. Epoxy Resin Plugging: Core Process. Vacuum plugging equipment injects epoxy resin. After curing and sequential grinding, surface planarity meets IPC-4761 Type VII (Filled & Covered) стандарты, providing sealed via protection.

7. ENIG Surface Finish: Applied per IPC-4552, ensuring a dense, uniform gold layer free from “black pad” defects.

8. Электрические испытания: 100% Летающий зонд or fixture testing verifies no opens or shorts.

6. Ключевые спецификации & Reliability Data

All parameters are grounded in industry standards to ensure accuracy and authority:

*Data references: IPC-TM-650 test method manual and UL certification standards.*

7. Приложения

Thanks to the high-density routing of the 16L rigid section and the dynamic flex capability of the 2L flex section, this product is primarily targeted at high-end digital products:

• High-End Smartphones & Таблетки: Used for camera modules, battery connections, and mainboard interconnects to save internal space.

• Digital Cameras & Camcorders: Ideal for lens extension modules requiring repeated, high-frequency bending.

• Wearable Electronics: Умные часы, VR/AR headsets. The 1.0мм thin profile and epoxy plugging ensure signal stability in ultra-compact enclosures.

• Solid-State Drives (твердотельные накопители): Used as the carrier for memory modules, leveraging rigid-flex for multi-layer stacking and interface connections.

8. Особенности продукта & Преимущества

1. Integrated Design, Saves Space: Replaces the traditional “PCB + Разъем + FPC” assembly. This eliminates connectors, reduces BOM costs, and significantly improves signal integrity by minimizing impedance discontinuities.

2. Epoxy Resin Plugging Eliminates Solder Blow-Out: Solves the yield-loss issue caused by outgassing from vias during lead-free reflow soldering.

3. Fine-Line Circuitry: Поддержка 4мил/4мил trace and space, enabling high-density interconnect (ИЧР) дизайн. The 0.2мм micro vias offer high routing freedom.

4. Высокая тепловая стабильность & Flex Durability: The FR4 and PI combination provides a robust platform for component assembly while ensuring long-term dynamic flex performance.

9. Призыв к действию & Inquiry Guidance

UGPCB is more than a circuit board manufacturer. We are your partner in ensuring product reliability.

We understand the manufacturing challenges of epoxy resin plugged rigid-flex PCBs. The key is controlling adhesion at the rigid-flex boundary and guaranteeing void-free plugging. With years of experience, UGPCB utilizes automated vacuum plugging lines, high-precision direct imaging, and rigorous АОИ системы. Every 16L Rigid + 2L Flex board we ship meets Сорт 3 reliability standards.

If you need a rigid-flex PCB that can handle high-density routing, lead-free assembly, and dynamic flexing without compromise, UGPCB is your ideal partner.

Contact UGPCB today for a custom quote.

• Submit your Gerber files. Our team will provide a free DFM (Дизайн для производства) анализ внутри 24 часы.

• Мы поддерживаем prototype и low-to-medium volume production with flexible lead times.

• Our dedicated engineering team offers one-on-one support to accelerate your digital product launch.