ЛОГОТИП УГКПБ
Обзор продукта
Как Производство печатных плат costs continue to rise, engineers and procurement professionals are actively seeking cost-effective solutions that do not compromise performance. The double-sided carbon oil circuit board offers a compelling answer to this challenge.
UGPCB presents thisdouble-sided carbon oil circuit board with the following specifications:
| Параметр | Спецификация |
|---|---|
| Базовый материал | ФР4 |
| Толщина доски | 1.6мм |
| Количество слоев | 2 слои (двусторонний) |
| Размер платы | 43.68 × 38.9mm |
| Минимальный диаметр отверстия | 0.33мм |
| Ширина следа / Расстояние | 0.32 × 0.36mm |
| Медная толщина фольга | 35/35мкм (1OZ on both sides) |
| Поверхностная отделка | Carbon oil process |
| Припаяя маска / Legend | Green solder mask / white silkscreen |
Этоstandard rigid double-sided PCB. It combines traditional copper traces with acarbon oil surface finish that forms conductive carbon film pads at designated locations. The result is a board that offers both the excellent conductivity of copper traces and the superior wear resistance of carbon film contacts. This makes it an ideal choice for keypad applications across consumer electronics, автомобильная электроника, и медицинское оборудование.
What Is a Double-Sided Carbon Oil Circuit Board?
А double-sided carbon oil circuit board is a printed circuit board that uses carbon-based conductive ink (commonly referred to as carbon oil or carbon ink) applied through screen printing onto designated areas of the Подложка печатной платы. After curing, this forms a carbon film conductive pattern.
Carbon oil is a conductive ink composed primarily of conductive carbon powder, thermosetting resin, and various additives. It is precisely printed onto specific locations on the монтажная плата – typically keypad contact areas – using screen printing technology. After high-temperature curing, the carbon oil forms a carbon film with a defined resistance value.
Compared to traditionalgold-plated keypads, carbon oil keypads offer a clear advantage.Carbon oil keypads are highly wear-resistant and can withstand repeated operations, generally lasting for hundreds of thousands or even millions of switching cycles. Replacing expensive gold keypads with carbon oil keypads has become a major industry trend.
Carbon oil boards are a common surface treatment method for single-sided and double-sided PCBs. Through a series of processes including inspection, тестирование, and burn-in testing, these печатные платы achieve reliable long-term operation.
Рекомендации по проектированию
Проектированиеdouble-sided carbon oil circuit board requires attention to the following key technical aspects:
Carbon Oil Trace Width and Spacing
According to industry PCB carbon oil manufacturing specifications, carbon oil trace width must be greater than 6mil (approximately 0.152mm). Carbon oil films are identified as “GTC” (top layer) или “GBC” (нижний слой) and are output as positive films.
Due to the excellent conductivity of carbon oil, adequate spacing must be maintained between carbon oil features on the finished board to prevent short circuits. Typical minimum clearances are:
The minimum alignment tolerance for carbon oil is±6mil.
Carbon Oil Window and Copper Pattern Spacing
To account for alignment tolerances and prevent oil leakage that could expose copper, the carbon oil pad must be larger than the copper pad by:
The same clearance must be maintained between the carbon oil window and surrounding copper patterns to prevent carbon oil from covering adjacent copper traces and causing short circuits.
Carbon Oil Thickness Control
Carbon oil thickness directly affects sheet resistance and wear resistance. Industry standard specifications are as follows:
- Single-print carbon oil thickness: 0.3–1.0mil, tolerance ±0.3mil
- Double-print carbon oil thickness: 1.0–2.0mil, tolerance ±0.4mil
For carbon oil thickness exceeding 1.0mil, a double-print process is required. The carbon oil film for the second print must be 3mil smaller on each side than the first-print film.
Design Standard References
When designing adouble-sided carbon oil circuit board, the following international standards should be followed:
- МПК-2221: Generic Standard on Printed Board Design – covers spacing, прозрачный, and structural design requirements
- МПК-6012: Qualification and Performance Specification for Rigid Printed Boards – defines performance requirements and product qualification criteria
- ИПК-ТМ-650: Test Methods Manual – provides standardized test procedures for carbon oil PCB performance
Принцип работы
Thedouble-sided carbon oil circuit board operates on two fundamental levels:
Conduction Principle
The conductivity of carbon oil is determined by its formulation, which consists of conductive carbon powder, thermosetting resin, and various additives. Conductivity is measured bysheet resistance (единица: Ω/□).
По закону Ома:
R = ρ × L / С
Where R is resistance, ρ is resistivity, L is conductor length, and S is conductor cross-sectional area. For the carbon film conductive layer, sheet resistance is inversely proportional to film thickness: Rs = ρ / Т (where t is carbon film thickness).
Carbon oil boards generally achieve sheet resistance of ≤20Ω/□, offering excellent cost-performance. Some low-resistance carbon oil formulations also incorporate a small amount of silver oil to further enhance conductivity.
Keypad Switching Principle
In keypad applications, аdouble-sided carbon oil circuit board works as follows: when a rubber keypad (or other elastic element) is pressed, the conductive carbon particles on the bottom of the keypad contact thecarbon oil pad на печатной плате, completing the circuit. The carbon oil pad serves as the keypad’scontact conductor, replacing traditional gold-plated contacts.
The advantages of carbon oil contacts include:
- High surface hardness andexcellent wear resistance
- Low contact resistance andfast response time
- Chemical inertness, предложениеcorrosion resistance and oxidation resistance
Приложения
Double-sided carbon oil circuit boards are widely used across various industries:
Бытовая электроника
- Remote controls: TV remotes, air conditioner remotes
- Calculators: Keypad panels
- Keyboards: Computer keyboards, membrane keyboards
- Gaming devices and electronic keyboards
Автомобильная электроника
- Window switch control boards
- Air conditioning control panels
- Instrument clusters and seat controllers
Медицинские устройства
- Medical equipment operator panels
- Blood glucose test strip electrodes
Industrial and Communications
- Industrial control equipment panels
- Коммуникационное оборудование
- Smart label RFID
Cost-Effective Alternatives
Carbon oil circuit boards can replace the following traditional processes:
- Copper-plated through-hole processes
- Silver paste via-filling processes
- Copper paste via-filling processes
Экологически чистый, low-cost carbon paste via-filling is a mainstream industry trend. Microsoft has adopted carbon oil for via-filling on power boards, completely replacing double-layer boards with copper-plated holes.
Классификация продуктов
Double-sided carbon oil circuit boards can be classified along the following dimensions:
By Conductivity Type
- Low-resistance carbon oil boards: Sheet resistance ≤20Ω/□ – suitable for keypad contacts
- High-resistance carbon oil boards: Suitable for potentiometers and resistor layers
- Carbon oil via-filled boards: Use carbon oil to fill via holes for interlayer connections
Базовым материалом
- FR4 carbon oil boards: Glass fiber/epoxy substrate (this product)
- CEM-1 carbon oil boards: Composite epoxy material substrate
- Polyimide carbon oil boards: Flexible substrate
По количеству слоев
- Single-sided carbon oil boards
- Double-sided carbon oil boards (this product)
- Multilayer carbon oil boards
By Surface Finish Combination
- СОГЛАШАТЬСЯ + углеродное масло
- ХАСЛ + углеродное масло
- ОСП + углеродное масло
- Carbon oil + Погружение (currently not suitable for mass production due to tin surface contamination issues)
Материалы
Base Material – FR4
This product uses ФР4 as the base material. FR4 is the industry designation for glass fiber-reinforced epoxy resin copper-clad laminate, предложение:
- Excellent mechanical strength and dimensional stability
- Superior electrical insulation properties
- Good moisture and heat resistance
- Dielectric constant of approximately 4.2–4.3
FR4 is the most commonly used base material for rigid PCBs and offers good adhesion compatibility with carbon oil.
Conductive Layer – Copper Foil
Both sides use35мкм (1ОЗ) медная фольга, ensuring excellent conductivity and current-carrying capacity.
Carbon Oil Material
Carbon oil is acarbon-based conductive ink состоит из:
- Conductive carbon powder: 30%–50% content – determines conductivity
- Thermosetting resin: Provides adhesion and curing properties
- Various additives: Regulate flow characteristics and adhesion performance
Carbon oil must exhibitstrong adhesion, peeling resistance, and wear resistance.
Паяльная маска и легенда
- Припаяя маска: Green ink – protects circuits and prevents short circuits
- Legend: White silkscreen – identifies component locations and board numbers
Спецификации производительности
Электрические характеристики
| Параметр | Спецификация | Reference |
|---|---|---|
| Sheet resistance | ≤20Ω/□ | Отраслевой стандарт |
| Resistance change rate | ≤10% (после 1 million cycles) | Отраслевой стандарт |
Механические характеристики
Dimensional Accuracy
| Параметр | Спецификация |
|---|---|
| Минимальный диаметр отверстия | 0.33мм |
| Minimum trace width | 0.32мм |
| Minimum trace spacing | 0.36мм |
| Толщина доски | 1.6мм |
Environmental Reliability
ПерИПК-ТМ-650 standard requirements:
- Damp heat test (ИПК-ТМ-650 2.6.3.7): 1000 hours at 40°C / 90% RH – carbon oil sheet resistance change ≤20%
- Temperature cycling test (ИПК-ТМ-650 2.6.7): 100 cycles from -40°C to 85°C – no carbon oil cracking, on-resistance fluctuation ≤15%
- Abrasion resistance test (ИПК-ТМ-650 2.5.9): After 1000 cycles – abrasion coefficient ≤5mg
Структура продукта
The typical structure of adouble-sided carbon oil circuit board (сверху вниз):
- Legend layer (белый): Component reference designators
- Solder mask layer (зеленый): Circuit protection and short-circuit prevention
- Carbon oil layer: Conductive carbon film at designated keypad locations
- Top copper traces (35мкм): Conductive circuitry
- FR4 substrate (1.6мм): Insulating support
- Bottom copper traces (35мкм): Conductive circuitry
- Solder mask layer (зеленый): Bottom layer circuit protection
- Legend layer (белый): Bottom layer identifiers
The carbon oil layer is applied only to designated keypad contact areas or conductive zones, not across the entire board.
Ключевые особенности
Significant Cost Advantage
The carbon oil process eliminates certain copper plating and etching steps, reducing material costs by 15%–25%. Compared to hard gold plating, carbon ink costs are 40%–60% lower.
Long Wear Life
Carbon oil keypads offer exceptional wear resistance, lasting over 1 million switching cycles with a resistance change rate of ≤10%.
Simple, Efficient Process
Carbon oil application usesscreen printing rather than lengthy electroplating processes. Production lead times can beshortened by over 30%.
Excellent Environmental Resistance
Carbon oil ischemically inert, offering better acid and alkali resistance than copper. It performs more reliably in humid or dusty environments. Carbon film surface hardness reaches3ЧАС (pencil hardness test), outperforming unprotected copper surfaces (1–2H).
Flexible Design Options
Carbon oil can be printed directly to form resistors, клавиатуры, and other functional modules, reducing solder joint counts by 30%–50%.
Производственный процесс
The typical manufacturing process for adouble-sided carbon oil circuit board:
- Material cutting: Cut FR4 copper-clad laminate to working dimensions
- Бурение: Drill via holes and mounting holes (minimum diameter 0.33mm)
- Surface cleaning: Chemical cleaning to remove oxides, oils, and contaminants
- Electroless copper / гальваника: Plating via holes for interlayer connections
- Pattern transfer: Exposure and development to form circuit patterns
- Офорт: Remove copper foil from non-circuit areas
- Strip: Remove dry film resist
- Solder mask printing: Apply green solder mask ink
- Solder mask curing: High-temperature curing of solder mask
- Surface finish – carbon oil printing:
- Screen print carbon oil at designated locations (single or double print)
- Pre-bake (80° C × 30 минуты)
- Main cure (150°C × 30–60 minutes)
- Legend printing: Print white silkscreen identifiers
- Профилирование: Router routing, V-cut, и т. д..
- Electrical testing: Continuity testing, insulation testing
- Final inspection and packaging
For PCBs withСОГЛАШАТЬСЯ + углеродное масло combination finish, carbon oil printing is typically performed after ENIG, with blue tape applied to protect carbon oil areas.
Сценарии приложения
Remote Controls and Appliance Control Panels
Carbon oil contacts offerlong press life and low contact resistance for fast response. Typical applications include TV remotes, air conditioner remotes, and washing machine control panels.
Automotive Electronic Control Modules
Carbon oil circuits inside vehicle door panels offerstrong corrosion resistance, performing reliably in complex automotive environments and solving the oxidation and breakage issues common with traditional solutions.
Medical Device Operator Panels
Carbon oil-printed touch sensing areas maintain stable operation in oily, humid environments. Carbon oil materials also offer excellentБиосовместимость.
Industrial Keyboards and POS Systems
In POS terminals and industrial keyboards, circuits combining carbon oil with FR4 substrates adapt to temperature variations and deliver stable, reliable performance.
Why Choose UGPCB for Your Double-Sided Carbon Oil Circuit Board?
✅ International Standard Compliance
Product design and manufacturing strictly followМПК-2221 (Generic Standard on Printed Board Design), МПК-6012 (Rigid Board Performance Specification), иИПК-ТМ-650 (Руководство по методам испытаний).
✅ Precision Manufacturing Capabilities
- Minimum hole diameter 0.33mm – supports high-density designs
- Минимальная ширина трассировки/расстояние 0.32 × 0.36mm – industry-leading precision
- Carbon oil sheet resistance ≤20Ω/□ – excellent conductivity
✅ One-Stop Service
UGPCB provides end-to-end services from дизайн печатной платы and manufacturing to Сборка печатной платы.
✅ High Reliability Guarantee
Carbon oil contacts offer wear life≥1 million cycles with resistance change rate ≤10%, ensuring long-term stable operation.
Запросить цену сегодня
Thedouble-sided carbon oil circuit board этоhighly cost-effective solution for keypad applications in consumer electronics, автомобильная электроника, и медицинское оборудование.
Нужен ли вам Прототипирование печатной платы, volume production, или услуги PCBA под ключ, UGPCB delivers professional technical support and competitive pricing.
📧Contact us today for a free technical consultation and custom quote!
- Website: www.ugpcb.com
- One-stop services: дизайн печатной платы, Производство, и сборка PCBA
Декларация источника данных
The technical data and standards cited in this article are derived from the following authoritative sources:
- МПК (Ассоциация, объединяющая электронную промышленность) Стандарты:
- IPC-2221 – Generic Standard on Printed Board Design
- IPC-6012 – Qualification and Performance Specification for Rigid Printed Boards
- IPC-TM-650 – Test Methods Manual
- Industry Standard Technical Specifications:
- PCB carbon oil manufacturing requirements (carbon oil trace width ≥6mil, film naming conventions, и т. д.)
- Carbon oil screen printing thickness control specifications (single print: 0.3–1.0mil; double print: 1.0–2.0mil)
- Industry Technical Literature:
- Carbon oil PCB manufacturing specifications – three key dimensions
- Carbon oil process PCB technical analysis
- Carbon oil PCB vs. standard PCB comparison
